TWPro Matt Black – Finishing Plate 30 degree-45 degree – 125mm

Description

TWPro MB – Finishing Plate 30 degree-45 degree – 125 The Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through between 45 degree and 60 degree. Use silicone and screws to secure against the wall.

Application: For use on solid fuel and gas/oil appliances such as wood stoves, gas coal effect fires, oil and gas boilers, and any solid fuel appliances.

Construction: Outer skin made from 304 grade stainless steel, 0.4mm thick. Inner skin made from 316 grade stainless steel, also 0.4mm thick. Insulation is compressed rockwool with a density of 200kg/m3 TWPro / 128Kg/m3. All parts are fully welded. Distance to combustibles: 50mm TWPro / 60mm on KC

Approvals: TWPro is HETAS Approved and is CE marked.

Designation Numbers: TWPro EN1856-1 T600 N1 W V2 L50040 G50, TWPro EN1856-1 T200 W V2 L50040 O20, KC EN1856-1 T600 N1 W V2 L50040 G60, KC EN1856-1 T200 W V2 L50040 O20.

Installation: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band. Ensure the required distance from the outside of the flue to any combustible material (wood, plasterboard).

Dimensions: 2 x 510 x 310