TWPro Silver – Wall Support 210mm to 420mm – 125mm

Description

Wall supports are intended for lateral support only and should be used a minimum of every 3 meters. Use recommended fixings to fit the wall support to the building surface. This wall band allows a distance adjustment of 80mm (minimum) to 420mm (maximum) from the wall surface, permitting a 340mm adjustment. This wall support needs to be manually cut down to achieve the desired effective length. Product Variants Available as TWPro – Wall Support 210mm-420mm – 125mm

Application: Designed for use on solid fuel and gas/oil appliances, including woodstoves, gas coal effect fires, oil and gas boilers, and any solid fuel appliances.

Construction: The outer skin is made from 304 grade stainless steel, 0.4mm thick, and the inner skin from 316 grade stainless steel, also 0.4mm thick. Insulation is compressed rockwool with a density of 200kg/m3 for TWPro and 128kg/m3. All parts are fully welded. Distance to Combustibles: 50mm for TWPro, 60mm on KC

Approvals: TWPro is HETAS Approved and CE marked with Designation Numbers TWPro EN1856-1 T600 N1 W V2 L50040 G50, TWPro EN1856-1 T200 W V2 L50040 O20. KC is also approved with Designation Numbers KC EN1856-1 T600 N1 W V2 L50040 G60, KC EN1856-1 T200 W V2 L50040 O20.

Installation: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band. Ensure the required distance from the outside of the flue to any combustible material (wood, plasterboard). Product Code: 15-125mm-055 Manufacturer: ERPucGCRqCc