TWPro Silver – Wall Support 210mm to 420mm – 150mm

Description

Wall Support 210mm-420mm – 150mm Wall support is intended for lateral support only and should be used a minimum of every 3 meters. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 420mm (maximum) adjustment from the wall surface, allowing a 340mm adjustment. This wall support has to be manually cut down to achieve the desired effective length. Product Information APPLICATION – For use on solid fuel and gas/oil appliances. e.g., woodstoves, gas coal effect fires, oil and gas boiler, and any solid fuel appliances. CONSTRUCTION – Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3 TWPro / 128Kg/m3. All parts are fully welded. Distance to combustibles is 50mm TWPro, 60mm on KC. APPROVALS – TWPro is HETAS Approved and is CE marked. Designation Number – TWPro EN1856-1 T600 N1 W V2 L50040 G50. TWPro EN1856-1 T200 W V2 L50040 O20. KC EN1856-1 T600 N1 W V2 L50040 G60. KC EN1856-1 T200 W V2 L50040 O20. INSTALLATION – TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plasterboard). Product Details: Designation: LOCATION20 / 313-B-2

Dimensions: 500mm x 230mm x 230mm Weight: 2.34 kg System: 15-d-055_dims / 15-d-055v2 Material: Other tubes, pipes, and hollow profiles (for example, open seam or welded, riveted, or similarly closed), of iron or steel