TWPro Matt Black – Premium Wall Bracket 50mm to 90mm – 125mm

Description

TWPro MB – Premium Wall Bracket 50mm-90mm – 125 Premium wall brackets are to be used for lateral support only and should be used a minimum of every 3 meters. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 50mm (minimum) and 90mm (maximum) adjustment from the wall surface, allowing a 40mm adjustment. This bracket will also allow a small amount of lateral movement left to right.

Application: For use on solid fuel and gas/oil appliances such as woodstoves, gas coal effect fires, oil and gas boilers, and any solid fuel appliances.

Construction: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3 TWPro / 128Kg/m3. All parts are fully welded. Distance to combustibles: 50mm TWPro / 60mm on KC

Approvals: TWPro is HETAS Approved and is CE marked.

Designation Numbers: TWPro EN1856-1 T600 N1 W V2 L50040 G50, TWPro EN1856-1 T200 W V2 L50040 O20, KC EN1856-1 T600 N1 W V2 L50040 G60, KC EN1856-1 T200 W V2 L50040 O20.

Installation: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band. Ensure the required distance from the outside of the flue to any combustible material (wood, plasterboard).

Dimensions: 30 x 20