TWPro Silver – LONG Retro Fit Base Support 120mm to 375mm – 150mm

Description

Long Retro Fit Base Support 150mm The Retrofit base support is adjustable from 120mm to 375mm from the wall, it can be used in conjunction with 90 degree or 135 degree tees when fitted directly above. This item can also be used as a load-bearing intermediate support on longer flue runs and can be retrofitted to make installation simpler. One support to be used on most standard single-story or 2 storey homes, supporting up to 9 metres of chimney immediately above the tee. Only recommended fixings should be used. Product Information APPLICATION – For use on solid fuel and gas/oil appliances. e.g., woodstoves, gas coal effect fires, oil and gas boiler, and any solid fuel appliances. APPROVALS – TWPro is HETAS Approved and is CE marked. Designation Number – EN1856-1 T600 N1 W V2 L50040 G50. EN1856-1 T200 W V2 L50040 O20. INSTALLATION – TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plasterboard). Product Details: Designation: 15-d-161_dims, 15-d-161 System: Not specified Inner Material: TWPro 316L Stainless Steel – 0.40mm thick Outer Material: 304 Stainless Steel – 0.40mm thick Fuels: Wood, Oil, Gas, Low sulfur coal Approvals: HETAS / CE Distance to Combustibles: 50mm Load support maximum distance: 9 Metres

Dimensions: 520mm x 272mm x 272mm Weight: 4.6